The Shelbourne tractor hedge trimmer has been engineered to outperform other machines in tough conditions for a wide variety of users including farmers, contractors, and councils.

Dyno testing has developed a more efficient high pressure, low flow hydraulic system. This gives reduced pressure drops through the system, which in turn generate less heat and provides more power to the cutting head. Two cast iron gear pumps are mated to the gearbox, one for the rotor drive and a secondary pump to provide fast responsive arm movements.

The Shelbourne range of tractor hedge trimmers can either be 3 point linkage or axle mounted and features a heavy duty frame and king post design, with folded steel tapered booms giving the strength where it is needed and saving weight where possible. The result is designed with strength and weight in appropriate areas.

A range of 5m to 8m reach models are available.


200/300/400 SERIES

These machines are solidly built entry level models capable of consistent, reliable performance for farmers, contractors and councils.

The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and strength in mind with similar styling to their HD siblings. Weight has been saved where possible without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom.

The machines have been designed and built in house based upon customer feedback from our larger contractor range of machines. The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates both parallel geometry and a power slew frame.

Standard Features:

  • 50hp HYDRAULICS
  • ALL MACHINES ARE 5m REACH
  • 250: FIXED FRAME, NON PARALLEL
  • 350 & 357: FIXED FRAME, PARALLEL GEOMETRY
  • 450 & 457: POWER SLEW, PARALLEL GEOMETRY
  • TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY
  • STANDARD 1.2m BELT DRIVE HEAD
  • STANDARD DOUBLE SKINNED HEAD
  • STANDARD 4” BOLTED POSITION HEAD ROLLER
  • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL

 

Find out more about the 200/300/400 Series has to offer, download a brochure here.

 

600 Series

The objective of the 600 series is to provide a powerful machine with high specification that is suitable for medium sized tractors. This range is suitable for both farmers and contractors.

The 656 features a modified frame and 5.6m arm taken from the 556 machine. The 660T features a 6.0m telescopic Boom extending from 4.8m to 6.0m. The 70HP hydraulic system is then taken from the HD700 series giving both machines a contractor compatible work rate along with the HD700 series belt drive 1.2m and 1.5m heads.

Standard Features: 

  • 70HP HIGH POWER HYDRAULIC SYSTEM
  • PARALLEL BOOM GEOMETRY
  • BI-DIRECTIONAL BELT DRIVE 1.2M HEAD
  • HEAVY DUTY 3 POINT LINKAGE STABILISER FRAME
  • CABLE CONTROLS
  • CABLE CONTROL ROTOR DRIVE

 

Find out more about the 600 Series, download a brochure here.

 

HD700 Series

The Shelbourne HD700 series range of Hedge and Verge Trimmers has been developed hand in hand with owner driver contractors over the last 10 years and is available in 5.5m fixed boom, 6m telescopic and 6.2m variable forward reach configurations.

A range of specifications and configurations makes it suitable for both farmers and contractors.

All models in the HD range can either be 3 point linkage or axle mounted and feature a heavy duty frame and king post design with folded steel tapered booms giving the strength where it is needed and saving weight where possible.

The HD700 Series has been engineered to outperform other machines in tough conditions. Dyno testing has developed a more efficient high pressure, low flow hydraulic system. This gives reduced pressure drops through the system which in turn generate less heat and provide more power to the cutting head. Two cast iron gear pumps are mated to the gearbox, the secondary pump provides fast responsive arm movements.

Standard Features:

  • 70HP HYDRAULIC SYSTEM WITH 540 RPM PTO INPUT
  • DIGITAL PROPORTIONAL JOYSTICK CONTROL
  • OIL COOLER WITH AUTO-REVERSE FAN
  • HEAD FLOAT
  • ARM FLOAT
  • AUTO BREAK BACK RESET
  • 1.2m BELT DRIVE FLAIL HEAD
  • PARALLEL ARM GEOMETRY
  • LED LIGHTS
  • PARKING STANDS/ FORKLIFT SHOES
  • TRANSPORT SAFETY STOP AND CAB PROTECTOR BRACKET

 

Find out more about the HD700 Series, download a brochure here.

HD800 Series

The Shelbourne HD800 Series of hedge and verge trimmers has been developed in cooperation with owners and users fo the HD700 series. It is available in both telescopic and variable forward reach telescopic format. The HD800 has been engineered to outperform other machines in tough conditions.

Standard Features:

  • 70HP HYDRAULIC SYSTEM WITH 540 RPM PTO INPUT
  • DIGITAL PROPORTIONAL JOYSTICK CONTROL
  • OIL COOLER WITH AUTO-REVERSE FAN
  • HEAD FLOAT
  • ARM FLOAT
  • AUTO BREAK BACK RESET
  • 1.2m BELT DRIVE FLAIL HEAD
  • PARALLEL ARM GEOMETRY
  • LED LIGHTS AND 180 DEGREE STROBE
  • PARKING STANDS/ FORKLIFT SHOES
  • TRANSPORT SAFETY STOP AND CAB PROTECTOR BRACKET

 

Want to find out more? Download a HD800 product brochure here.